- Bluetooth and Wi-Fi enabled
Connect with nearby energizer using Bluetooth to check voltage, turn on and off, and configure the remote address
Connect to energizer remotely over the internet to receive notifications when voltage drops. Check voltage remotely, and turn on and off remotely (Requires Wi-Fi network coverage).
Monitor and control the energizer from your phone
Use the Datamars Livestock Farm App to connect to the energizer and see the fence voltage in real-time, configure the energizer settings, and connect the energizer to the Wi-Fi network.
Once the energizer is connected to the internet, it sends a notification when fence voltage drops, so issues can be resolved quickly.
In conclusion, If a fault is found on the fence line, use the app to turn the energizer off right from where you’re standing to fix the fault, then turn the energizer back on and check the voltage is back to normal.
Technical Specifications
Distance powers: km 460 km Distance powers: miles 290 miles Distance powers: Acres 640 acres Distance powers: Hectares 260 hectares Input Voltage 100–240 V 50-60 Hz Maximum stored energy 68 J Maximum output energy 46 J @ 33Ω Output Voltage @ 100 Ω up to 8,900 V Output Voltage @ 500 Ω up to 9,300 V Minimum number of earth rods required
Hot
Stafix 46000W Main Energizer Machine
KSh 132,000.00
- Stafix 46000W Mains Energizer Powers up to 460 km / 640 acres / 290 miles / 260 hectares of fence 46 J maximum output energy (68 J stored energy)
Description
Related products
Razor Wire 450mm
- 450mm diameter
- 10m long
- Double Galvanized to reduce collosion
- Fence barb wire
Gallagher Fence Volt Meter
- Monitors fence voltage and helps trace fence-line shorts and faults.
- The DVM reads the voltage for battery energizers even when the energizers are in Battery Save Mode.
- Powered by one 9V battery with a life of 6-12 months.
- Water resistant.
- Pocket size.
Electric Fence Light Indicator
- The fence light flashing rate changes with the change of voltage on the fence. The slower the rate the lower the voltage. The intensity of the light remains the same so it can be seen from far irrespective of the fence voltage. It is installed between the earth and live wire to indicate the status and condition of the fence for peace of mind.
Hammer Surge Stop
- Designed to cope with lightning and power grid induced surges.
- Comprises of RF Filter.
Sliding Gate Contacts Nemtek
- Double HV contact for sliding gates
- Stainless steel
- Facilitates in circuit (in-line) gate connection
- Dual plunger system keeps fence circuit closed while gate is open
Nemtek Wizord 2i Energizer
Wizord 2 Fence Energizer Features
• 2 Joule output energy (single zone)
• Robust and flexible design for home security
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Easy-to-use tag included for controlling the energizer
• Powered by 240V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
Specifications
Enclosure size: L285 x W212 x D120 Weight excluding battery (7AH): 3.1kg Weight including battery (7AH): 5.3kg IP rating: IPx4 Operating temperatures: -10°C to 50°C Operating humidity: < 80% non-condensing Electrical supply voltage: 240V Typical power consumption (normal operating conditions): 17VA Standby time (fully charged battery): 24hrs Energy output 500 Ohms load: 2.0 Joule Open circuit voltage: 7 400V
JVA Z28 Energizer
Features:
- Safe but effective deterrent, high voltage output
- High and low power modes
- Tested to IEC60336.2.76
- Built in charger and space for a 12V 7.2aH backup battery
- Alarms on fence short or open circuit
- Control and programming via LCD keypad or Touch keypad
- Large number of programmable options
- Monitor via PC (using Perimeter Patrol software)
- 3 control inputs which can be configured to take NO or NC control contacts.
- 3 switched 12V DC outputs (2 strobe and 1 siren)
Hammer Energizer LED Keypad
- Energizer remote operation (on/off/reset)
- Multiple keypads can be connected to one energizer
- Three level user interface with programmable codes
- Adjust trigger voltage
- Adjust alarm delays
- Adjust Siren time-out
- Bypass alarm and aux outputs