This detector is a heat detector that uses the heat runner with the best heat transfer sensitivity. It is designed to provide open area protection without wiring. The red LED on the detector provides a local 360°visible alarm indication. They flash once every minute, indicating that the power is on and the detector is working. When an alarm occurs, the red LED is on, until the temperature is lower than the alarm threshold.
Asenware Standalone Heat Detector
KSh 1,700.00
- This detector is a heat detector that uses the heat runner with the best heat transfer sensitivity. It is designed to provide open area protection without wiring. The red LED on the detector provides a local 360°visible alarm indication.
Related products
Asenware 2 Zone Conventional Fire Panel
- It has 2 level control mode by a lock.
- It has 24VDC power supply output.
- It has FIRE and FAULT signal output.
- Each zone has 1 circuit detectors input.
Standalone smoke detector
The standalone smoke detector is designed to protect you and your family from the dangers of smoke and fire, the Ei 100BQWX continuously monitors for the signs of smoke and fire even if in the event of power loss in your home. It has an easily visible test button and the alarm will warn you when the battery needs replacing by giving an intermittent “beep” sound. Easy to install and comes complete with battery and fixing kit.
The Standalone smoke detector Ei 100BNX is tested, accredited, and Kitemarked by BSI to EN 14604; 2005 and has a 5-year Guarantee.
Sufficient smoke must enter your standalone smoke detector before it will respond. Your Smoke detector needs to be within 10 paces (23 feet)of the fire to respond quickly. It also needs to be in a position where its alarm can be heard throughout your home, so it can wake you and your family in time for you all to escape. A single Smoke Alarm will give some protection if it is properly installed, but most homes will require two or more to ensure that a reliable early warning is given. For maximum protection, you should put individual Smoke Alarms in all the rooms where the fire is most likely to break out. Your first Smoke Alarm should be located between the sleeping area and the most likely sources of fire (living room or kitchen for example). But it should not be more than 10 paces (seven meters) from the door to any room where a fire might start and block your escape from the house.
Asenware Manual Call Point
Asenware Manual Call Point is designed to be used with an intelligent two-wire control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the equipment status of the manual fire call points. When the manual fire call points are operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit.
1 Semi-flush or surface mounting
2 Compatible with the latest EN standards
3 Lever reusable (non-glass break)
4 LED indicator
Conventional Fire Strobe Sounder
- Equipment operation stable & reliable
- Easy to install & wire
- Equipment has also issued two kinds of sound and flash an alarm signal, even people with disabilities can be a timely response to evacuate.
Two core Fire Alarm Cable 0.8mm
Two Core Fire Alarm Cable 0.8mm in Kenya.
Two Core Fire Alarm Cable 1.5mm is designed to resist the spread of fire into a new area
Fire Alarm Cable 1.0mm
- Fire cable 1.0mm
- 100m roll
Asenware Fire Alarm Smoke Detector
Fire Alarm Smoke Detector for sale in Kenya Asenware Convectional Fire Alarm Smoke Detector, uses a state-of-the-art optical sensing chamber.
Fire Exit Sign Double Sided
Fire Exit Sign Double Sided illuminated fire exit/emergency exit double-sided sign designed for use on emergency escape routes. designed to meet the EEC 92/58 fire exit design with running man, door symbol, and an arrow pointing left/right, it comes in a white stove-enameled.