Back to products
Next product
Merlin 4I Energizer With Keypad
KSh 27,900.00
Large Electric Fence Insulators
KSh 45.00
Electric Fence Insulators, heavy-duty nail-on or staple-on insulators, or Claw insulators for electric fencing with timber posts.
Can be used to guidewire around the back of an electric fencing corner post Claw grips to hold the wire firmly in place A large shield prevents arcing Uv-stabilized for long life Suitable for all types of steel wire, poly wire, poly braid, and poly rope. 1.6mm galvanized wire, or 2.5mm hot dipped galvanized wire.
They are mounted on the poles using nails, on wooden posts, or pop rivets on metallic posts.
Can be used to guidewire around the back of an electric fencing corner post Claw grips to hold the wire firmly in place A large shield prevents arcing Uv-stabilized for long life Suitable for all types of steel wire, poly wire, poly braid, and poly rope. 1.6mm galvanized wire, or 2.5mm hot dipped galvanized wire.
Can be used to guidewire around the back of an electric fencing corner post Claw grips to hold the wire firmly in place A large shield prevents arcing Uv-stabilized for long life Suitable for all types of steel wire, poly wire, poly braid, and poly rope. 1.6mm galvanized wire, or 2.5mm hot dipped galvanized wire.
Related products
Pop Rivet Gun
- Suitable with steel and aluminum pop rivets
- Complete with nose spanner and 3 interchangeable noses
Stafix X3 Energizer
Can be used in mains, battery or solar power applications, providing convenient, versatile livestock control.
Powers up to 45 acres / 18 ha (30 km) of fence
3 J maximum output energy(4.5 J stored energy)
Nemtek Wizord 2i Energizer
Wizord 2 Fence Energizer Features
• 2 Joule output energy (single zone)
• Robust and flexible design for home security
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Easy-to-use tag included for controlling the energizer
• Powered by 240V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
Specifications
Enclosure size: L285 x W212 x D120 Weight excluding battery (7AH): 3.1kg Weight including battery (7AH): 5.3kg IP rating: IPx4 Operating temperatures: -10°C to 50°C Operating humidity: < 80% non-condensing Electrical supply voltage: 240V Typical power consumption (normal operating conditions): 17VA Standby time (fully charged battery): 24hrs Energy output 500 Ohms load: 2.0 Joule Open circuit voltage: 7 400V
Wizord 4i Energizer
3.7 Joule output energy (single zone)
• Robust and flexible design for home and commercial security
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Easy-to-use tag included for controlling the energizer
• Powered by 240V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
Sliding Gate Contacts Nemtek
- Double HV contact for sliding gates
- Stainless steel
- Facilitates in circuit (in-line) gate connection
- Dual plunger system keeps fence circuit closed while gate is open
Hammer Surge Stop
- Designed to cope with lightning and power grid induced surges.
- Comprises of RF Filter.
Electric Fence Light Indicator
- The fence light flashing rate changes with the change of voltage on the fence. The slower the rate the lower the voltage. The intensity of the light remains the same so it can be seen from far irrespective of the fence voltage. It is installed between the earth and live wire to indicate the status and condition of the fence for peace of mind.
JVA Z28 Energizer
Features:
- Safe but effective deterrent, high voltage output
- High and low power modes
- Tested to IEC60336.2.76
- Built in charger and space for a 12V 7.2aH backup battery
- Alarms on fence short or open circuit
- Control and programming via LCD keypad or Touch keypad
- Large number of programmable options
- Monitor via PC (using Perimeter Patrol software)
- 3 control inputs which can be configured to take NO or NC control contacts.
- 3 switched 12V DC outputs (2 strobe and 1 siren)