- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input .
- Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
Previous product
Back to products
Battery Standalone Smoke Detector
KSh 1,700.00
Next product
Fire Alarm Cable 1.0mm
KSh 5,100.00
Asenware 8 Zone Fire alarm control Panel
KSh 23,900.00
- The AW-CFP2166 series 8 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard.And it is the central part of conventional fire alarm system, designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.
Description
Related products
Asenware 2 Zone Conventional Fire Panel
- It has 2 level control mode by a lock.
- It has 24VDC power supply output.
- It has FIRE and FAULT signal output.
- Each zone has 1 circuit detectors input.
Two Core Fire Alarm Cable 1.5mm
Two Core Fire Alarm Cable 1.5mm is designed to resist the spread of fire into a new area. Fire-resistant or fire-rated cables are designed to maintain circuit integrity and continue to work for a specified period of time under defined conditions.
We supply and install fire-rated alarm cable, which conforms to (UL) 758 and ISO 9001 Standard.
Two core, 100m per roll.
Call us for more fire alarm products.
100m 1.5mm at Ksh 5000
Two core Fire Alarm Cable 0.8mm
Two Core Fire Alarm Cable 0.8mm in Kenya.
Two Core Fire Alarm Cable 1.5mm is designed to resist the spread of fire into a new area
Keyguard Emergency Key Box
- Red keyguard box for safe key monitoring
- Status switch N/O and N/C for connection to fire panel
- Breakable plastic tabs allow monitored access to emergency keys
- A non-hazardous breakable plastic tab cover for areas where glass is not suitable (kitchens, schools etc.)
Fire Alarm Cable 1.0mm
- Fire cable 1.0mm
- 100m roll
Standalone smoke detector
The standalone smoke detector is designed to protect you and your family from the dangers of smoke and fire, the Ei 100BQWX continuously monitors for the signs of smoke and fire even if in the event of power loss in your home. It has an easily visible test button and the alarm will warn you when the battery needs replacing by giving an intermittent “beep” sound. Easy to install and comes complete with battery and fixing kit.
The Standalone smoke detector Ei 100BNX is tested, accredited, and Kitemarked by BSI to EN 14604; 2005 and has a 5-year Guarantee.
Sufficient smoke must enter your standalone smoke detector before it will respond. Your Smoke detector needs to be within 10 paces (23 feet)of the fire to respond quickly. It also needs to be in a position where its alarm can be heard throughout your home, so it can wake you and your family in time for you all to escape. A single Smoke Alarm will give some protection if it is properly installed, but most homes will require two or more to ensure that a reliable early warning is given. For maximum protection, you should put individual Smoke Alarms in all the rooms where the fire is most likely to break out. Your first Smoke Alarm should be located between the sleeping area and the most likely sources of fire (living room or kitchen for example). But it should not be more than 10 paces (seven meters) from the door to any room where a fire might start and block your escape from the house.
Asenware Fire Bell
Highlights
- Easy to install
- Perfectly configured in a variety of alarm systems
- Indoor, Outdoor Working Principle
Fire Exit Sign Double Sided
Fire Exit Sign Double Sided illuminated fire exit/emergency exit double-sided sign designed for use on emergency escape routes. designed to meet the EEC 92/58 fire exit design with running man, door symbol, and an arrow pointing left/right, it comes in a white stove-enameled.