Previous product
Back to products
Standalone smoke detector
KSh 2,900.00
Next product
12v Piezo Buzzer
KSh 400.00
Two Core Fire Alarm Cable 1.5mm
KSh 5,900.00
Two Core Fire Alarm Cable 1.5mm is designed to resist the spread of fire into a new area. Fire-resistant or fire-rated cables are designed to maintain circuit integrity and continue to work for a specified period of time under defined conditions.
We supply and install fire-rated alarm cable, which conforms to (UL) 758 and ISO 9001 Standard.
Two core, 100m per roll.
Call us for more fire alarm products.
100m 1.5mm at Ksh 5000
Related products
Asenware 8 Zone Fire alarm control Panel
- The AW-CFP2166 series 8 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard.And it is the central part of conventional fire alarm system, designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.
Standalone smoke detector
The standalone smoke detector is designed to protect you and your family from the dangers of smoke and fire, the Ei 100BQWX continuously monitors for the signs of smoke and fire even if in the event of power loss in your home. It has an easily visible test button and the alarm will warn you when the battery needs replacing by giving an intermittent “beep” sound. Easy to install and comes complete with battery and fixing kit.
The Standalone smoke detector Ei 100BNX is tested, accredited, and Kitemarked by BSI to EN 14604; 2005 and has a 5-year Guarantee.
Sufficient smoke must enter your standalone smoke detector before it will respond. Your Smoke detector needs to be within 10 paces (23 feet)of the fire to respond quickly. It also needs to be in a position where its alarm can be heard throughout your home, so it can wake you and your family in time for you all to escape. A single Smoke Alarm will give some protection if it is properly installed, but most homes will require two or more to ensure that a reliable early warning is given. For maximum protection, you should put individual Smoke Alarms in all the rooms where the fire is most likely to break out. Your first Smoke Alarm should be located between the sleeping area and the most likely sources of fire (living room or kitchen for example). But it should not be more than 10 paces (seven meters) from the door to any room where a fire might start and block your escape from the house.
Fire Alarm Cable 1.0mm
- Fire cable 1.0mm
- 100m roll
Conventional Manual Call Point With Indicator AW-CMC2166-5
- The Manual call points are high reliability and easy installation.
- Available for flush or surface mounting
- Suitable for most conventional fire alarm system
Battery Standalone Smoke Detector
- Operating voltage: 9VDC(with battery 6F22)
- Operating current: monitoring status≤8uA, alarm status≤20mA
- Operating temperature: -10℃～55℃，Relative humidity: ≤95%(non-condensing)
- Protection class: IP20
- Application: For indoor use only
- Smoke Alarm Sensitivity: 0.18 to 0.26 dBM
- Alarm Level: ≥85dB@3m and ≥93dB@1m
- Materials and colors: ABS, white
- Size: 105mm*105mm*43mm
- Weight: about 130g
- Talk to us today on 0719402315 for supply, quotations, site visits, and installation.
Keyguard Emergency Key Box
- Red keyguard box for safe key monitoring
- Status switch N/O and N/C for connection to fire panel
- Breakable plastic tabs allow monitored access to emergency keys
- A non-hazardous breakable plastic tab cover for areas where glass is not suitable (kitchens, schools etc.)
Fire Blanket big size 1.8m by 1.8m
Fire Blanket big size 1.8m by 1.8m is made of fiberglass material to shield you from serious burns. It can be used to smother down fires or used to wrap around a person whose clothes have caught fire. Placed in or around areas where a fire is likely to start, most likely around kitchen areas, gas stations, warehouses, and so on. The fire blanket is discarded after use.
Fire blankets are designed for quick release and deployment and ideally, should be sited in view for emergency access, close to the area of fire risk. In the home where wall hanging may be obtrusive, the blanket can be hung on the inside of a kitchen cupboard door close to the cooking area.
Once deployed over the fire, leave for several minutes until all signs of fire have disappeared. Normally fire blankets are not reusable if the outer sleeve is damaged by the fire allowing the ingress of oxygen.
Conventional Fire Strobe Sounder
- Equipment operation stable & reliable
- Easy to install & wire
- Equipment has also issued two kinds of sound and flash an alarm signal, even people with disabilities can be a timely response to evacuate.