Two leds on each detector provide a local 360° visible alarm indication. They die out when the ambient temperature does not reach alarm value. If the temperature reaches the alarm value, then the detector enters to alarm mode and leds light. Operating voltage range: 9 to 28 vdc volts non-polarized maximum alarm current(led on): ≤48ma@24vdc operating temperature range: -10°c to 70°c fix temperature range: 60°c rate of rise alarm: 7.1°c/5s height: 31.78mm installed in base diameter: 99.45mm
Previous product
Back to products
Fire Alarm Cable 1.0mm
KSh 5,100.00
Next product
Asenware Fire Bell
KSh 3,400.00
Asenware Conventional Heat Detector
KSh 1,300.00
Highlights
- Power supply non-polarized input
- Twin LED for 360 visual
- Strong adaptability for circumstance
Buy at best and discounted prices in Nairobi, Kenya
Related products
Battery Standalone Smoke Detector
- Operating voltage: 9VDC(with battery 6F22)
- Operating current: monitoring status≤8uA, alarm status≤20mA
- Operating temperature: -10℃～55℃，Relative humidity: ≤95%(non-condensing)
- Protection class: IP20
- Application: For indoor use only
- Smoke Alarm Sensitivity: 0.18 to 0.26 dBM
- Alarm Level: ≥85dB@3m and ≥93dB@1m
- Materials and colors: ABS, white
- Size: 105mm*105mm*43mm
- Weight: about 130g
- Talk to us today on 0719402315 for supply, quotations, site visits, and installation.
Fire Blanket big size 1.8m by 1.8m
Fire Blanket big size 1.8m by 1.8m is made of fiberglass material to shield you from serious burns. It can be used to smother down fires or used to wrap around a person whose clothes have caught fire. Placed in or around areas where a fire is likely to start, most likely around kitchen areas, gas stations, warehouses, and so on. The fire blanket is discarded after use.
Fire blankets are designed for quick release and deployment and ideally, should be sited in view for emergency access, close to the area of fire risk. In the home where wall hanging may be obtrusive, the blanket can be hung on the inside of a kitchen cupboard door close to the cooking area.
Once deployed over the fire, leave for several minutes until all signs of fire have disappeared. Normally fire blankets are not reusable if the outer sleeve is damaged by the fire allowing the ingress of oxygen.
Keyguard Emergency Key Box
- Red keyguard box for safe key monitoring
- Status switch N/O and N/C for connection to fire panel
- Breakable plastic tabs allow monitored access to emergency keys
- A non-hazardous breakable plastic tab cover for areas where glass is not suitable (kitchens, schools etc.)
Asenware 2 Zone Conventional Fire Panel
- It has 2 level control mode by a lock.
- It has 24VDC power supply output.
- It has FIRE and FAULT signal output.
- Each zone has 1 circuit detectors input.
16AWG Asenware Fire Alarm Resistant Cable
16AWG Asenware Fire Alarm Resistant Cable has been specially designed and thoroughly tested to retain its durability and reliability when fire strikes.
A fire alarm system is reliant in no small part to the cabling that connects the devices and supplies power. Without reliable, robust cable the fire alarm system would be prone to costly faults and malfunctions. It is therefore essential that you only use the best cable, fitted by qualified electricians, in your fire alarm system.
16AWG Asenware Fire Alarm Resistant Cable Specifications:-
Type : Insulated
Conductor Type: Solid
Application: Heating
Conductor Material: Copper
Sheath Material: PVC
Diameter: 1.5mm
Two core Fire Alarm Cable 0.8mm
Two Core Fire Alarm Cable 0.8mm in Kenya.
Two Core Fire Alarm Cable 1.5mm is designed to resist the spread of fire into a new area
Asenware Standalone Heat Detector
- This detector is a heat detector that uses the heat runner with the best heat transfer sensitivity. It is designed to provide open area protection without wiring. The red LED on the detector provides a local 360°visible alarm indication.
Fire Alarm Cable 1.0mm
- Fire cable 1.0mm
- 100m roll