iWise Motion Detector PET
iWise Motion Detector PET is ideal for any type of installation where pets are present, allowing complete freedom of movement for pets with no loss of catch performance.
iWise Motion Detector PET specially designed lens – together with RISCO Group’s unique Variable Pet Threshold™ (VPT™) technology and active creep zone – ensure intruder detection together with pet immunity.
Joint Clamps for Electric Fence
- Shop for electric fence joint clamp from a Huge Collection – Get the Best Deals & Offers on joint clamp from Alltech| Fast Delivery
JVA 4-Line LCD Keypad
JVA 4-Line LCD Keypad is an integral component in the JVA Security Electric Fence product range. Providing a centralized interface between the Customer and their Perimeter Security Solution; it displays the current condition of each security device connected and can draw attention to adverse fence conditions. The keypad is used to control individual fence Energizers, Monitors or the entire site. The Customer has access to all of these features via a Menu Driven system or by entering key sequences. Security Installers also use the keypad to configure the JVA Security devices to the customer’s needs.
JVA BM1 High Voltage Fence Monitor
JVA BM1 High Voltage Fence Monitor (PTE0211) is a basic electric fence monitor. It provides an alarm when your electric fence is cut or shorted, or the energizer has been turned off.
When connected to the end of the fence (return wire) the BM1 can monitor one complete circuit (zone) of electric fence.
This monitor can be powered from a 12V power supply, or a 12V battery. If you need the monitor to operate during a power failure, consider using a 12V lead acid battery that is being kept charged from a battery charger or solar panel.
The BM1 is intended to be used with pulsed type electric fence energizers with output voltages of 10kV or less. The energizer should conform to IEC60335.2.76 or similar.
JVA Electric Fence Fault Finder
JVA Electric Fence Fault Finder makes finding shorts on electric fence as easy as following an arrow. It is also known as an Electric Fence Power Probe.
JVA Fence Monitor BM1
-
JVA BM1 Basic Monitor
-
JVA BM1 Electric Fence monitor is used in Kenya to check on the status of the electric fence.
-
It can monitor fence faults including overgrown grass and vegetation on the fence line and also wire cuts and shorts on the electric fence.
- It is highly recommended to put an electric fence monitor on an installed electric fence in Kenya.
-
JVA BM1 is the most affordable and easy-to-use fence monitor in Kenya.
JVA MB16 Mains/Battery Electric Fence IP Energizer® 16J 160km
JVA MB16 Mains/Battery Electric Fence IP Energizer® 16J 160km
Features:-
- IP Energizer Controller app available for iPhone and Android
- 16J (22J stored) powers up to 160 kilometres of fence*
- Sleek styling, rugged practical design
- Mains (via AC Plug-Pack) or 12V Battery operation (battery no included)
- Auto-Sync™ Technology for safer fences
- LCD shows fence voltage, stored energy and battery voltage
- Power on demand (automatically ramps up power when needed)
- Bi-Polar or conventional output
- Reverse battery protection
- Highly efficient and intelligent digital design
- UV stable enclosure
- O-Ring sealed case for ant and moisture protection
JVA Strainer Insulators
JVA Strainer Insulator Features:-
- Suitable for high strain use
- Superior UV stabilisation for long life
- Deep grooves hold wire in place and prevent twisting
- Long leakage path prevents arcing
- Use with most sizes of fence wire
JVA Z13 Single Zone Security Energizer 2.8 Joule
JVA Z13 is a single zone security electric fence energizer. It is a simple, economical unit designed for smaller sites. The Z13 can be programmed and controlled using the optional LCD keypad or Touch keypad. It can also be networked with other Z Range Energizers to form a pulse synchronized group for larger sites which require multiple zones. It is in a class of its own when it comes to features and benefits at an affordable price.
JVA Z14 Energizer
- Safe but effective deterrent, high voltage output
- High and low power modes
- Built-in charger and space for a 12V 7.2aH backup battery
- Supports Bi-Polar or conventional fence wiring
- Alarms on fence short or open circuit
- Control and programming via LCD keypad or Touch keypad
- A large number of programmable options
- Monitor via PC (using Perimeter Patrol software)
- 2 control inputs
- 2 switched 12V DC outputs (Siren and Strobe)
*Notes
- 12V 7ah battery is not included
JVA Z18 Security Energizer 8 Joule with LCD Display
JVA Z18 Security Energizer 8 Joule with LCD Display purpose built for control and monitoring of perimeter security electric fences. It can meet all of the requirements from basic residential to fully integrated high profile installations. The Z18 can be programmed and controlled using the optional LCD keypad or Touch keypad. It can also be networked with other Z Range Energizers to form a pulse synchronized group for larger sites which require multiple zones.
JVA Z28 Energizer
Features:
- Safe but effective deterrent, high voltage output
- High and low power modes
- Tested to IEC60336.2.76
- Built in charger and space for a 12V 7.2aH backup battery
- Alarms on fence short or open circuit
- Control and programming via LCD keypad or Touch keypad
- Large number of programmable options
- Monitor via PC (using Perimeter Patrol software)
- 3 control inputs which can be configured to take NO or NC control contacts.
- 3 switched 12V DC outputs (2 strobe and 1 siren)
K40 Time Attendance Terminal
- The Terminal has a 2.8 “TFT screen
- Has an incorporated third party electric lock and exit button
- TCp/IP and USB Host for fast Data Management
- Comes with an inbuilt Back up battery for support of the system during power loss
Keyguard Emergency Key Box
- Red keyguard box for safe key monitoring
- Status switch N/O and N/C for connection to fire panel
- Breakable plastic tabs allow monitored access to emergency keys
- A non-hazardous breakable plastic tab cover for areas where glass is not suitable (kitchens, schools etc.)
Lanstar P1000 Electric Fence Energizer
- Lanstar P1000 Electric Fence Energizer
Large Electric Fence Insulators
Electric Fence Insulators, heavy-duty nail-on or staple-on insulators, or Claw insulators for electric fencing with timber posts.
Can be used to guidewire around the back of an electric fencing corner post Claw grips to hold the wire firmly in place A large shield prevents arcing Uv-stabilized for long life Suitable for all types of steel wire, poly wire, poly braid, and poly rope. 1.6mm galvanized wire, or 2.5mm hot dipped galvanized wire.
They are mounted on the poles using nails, on wooden posts, or pop rivets on metallic posts.
Can be used to guidewire around the back of an electric fencing corner post Claw grips to hold the wire firmly in place A large shield prevents arcing Uv-stabilized for long life Suitable for all types of steel wire, poly wire, poly braid, and poly rope. 1.6mm galvanized wire, or 2.5mm hot dipped galvanized wire.
Can be used to guidewire around the back of an electric fencing corner post Claw grips to hold the wire firmly in place A large shield prevents arcing Uv-stabilized for long life Suitable for all types of steel wire, poly wire, poly braid, and poly rope. 1.6mm galvanized wire, or 2.5mm hot dipped galvanized wire.
LED Stainless Steel Keyswitch
LED Stainless Steel Keyswitch is a door release key switch with LED indication. Use key to release door in case of panic/emergency.
Lightsys Alarm Panel
Get in-depth information on RISCO Group LightSYS LCD Keypad Intruder alarm system control panels & accessories including detailed technical specifications.
Accessories: LCD keypad
Lightsys GSM Module for alarm systems
Lightsys GSM Module for alarm systems is an easy-to-add plug-in module that enables the system to communicate over the GPRS/GSM networks for reporting, control, and programming. It can be used as the primary communication or as a backup for the IP or PSTN communications in case of communication failure.
Reporting events to monitor stations can be done over voice, SMS, or GPRS using the RISCO IP Receiver. Events can be reported in SIA/IP, SIA, and Contact ID monitoring protocols.
Using the GSM/GPRS module, end users can obtain system control using DTMF or SMS In addition, users can enjoy peace of mind by receiving real-time SMS, voice messages, and email alerts.
Lightsys GSM Module for alarm systems also supports two-way voice communication which is beneficial for elderly care, allowing two-way communication with users in times of emergency.
Lightsys LCD Keypad
Graphic LCD keypad with or without proximity reader. Compatible with LightSYS and all ProSYS panels
Lightsys Wireless Expander
Lightsys Wireless Expander supports up to 32 wireless detectors or panic/zone keyfobs, 16 rolling code keyfobs, 2 Wireless Keypads and 3 Wireless Sounder. It includes two utility outputs and can also be used in stand-alone mode, ideal for parking gate control with support for up to 200 keyfobs and 2 outputs.
LP600 Time Attendance
- Built-in backup battery
- Optional built-in WiFi module
- Optional language, English and Spanish
Magnetic Door Contacts
- Simple and convenient for installation
Magnetic Door Lock 180Kg
- Working Voltage: DC12V
- Model Name: magnetic locks 180kg
- Zl bracket 1500
MB360 ZKTeco
- MB360 is an innovative product featured with ZK advanced fingerprint and face recognition technologies. It supports multiple verification methods including face, fingerprint, card, password, combinations between them and basic access control functions. User verification is performed in less than 1 second, which streamlines the process of access. The communication between the MB360 and PC is by TCP / IP or USB interface for manual data transfer. Its sleek design fits perfectly in any environment.
- Talk to us today on +254 722 967544 for supply, quotations, site visits, and installation.